Light-duty uprooting rake grapple KRH 1800 with two visors
Unit: tk
Qty: Out of Stock
Delivery time: 14-21 tööpäeva
Width 1800 mm and height 850 mm
Maximum opening range 1025 mm
Two visors move separately
The device uses one pair of hydraulic outputs
Hydraulic hoses included
HARDOX tine ends
We add fasteners according to the loader type
Weight according to 265 kg
Designed for tractor loader
The light-duty uprooting rake grapple KRH 1800 with two visors is designed to be attached to a tractor loader with a quick-release fastener. Allows you to pry stones out of the ground, uproot lighter roots, rake up branches and debris and gather them into a pile. It is also possible to move trees, stones, plows or garbage with a rake-grapple.
The light rooting rake-grapple KRH 1800 with two visors is very good for landscaping and maintenance work in companies engaged in this. It is also a necessary tool in a home farm. The grapple can be used to lift raw material onto feed tables, unload loads. It is a good and durable tractor auxiliary tool for forestry work on a farm. Easy to use and suitable for many different tractors.
The ends of the grapple tine are made of HARDOX steel, which ensures their strength and wear resistance. Attachments SKID, euro or according to the type of loader desired by the customer. Suitable for tractor loaders from 60 horsepower. The grapple is moved by two cylinders. Attachments can be added according to the type of loader. The most common is the EURO attachment, but over the years there have been over 35 different attachment types.
PS! In most cases, the product is made to order. Products in stock usually come without attachments, we will add them later according to the loader type. The attachment type must be determined before ordering.
Overall width: 2500 mm; height: 1400 mm; depth: 1750 mm
Mounting brackets added according to loader type
Bucket weight: 970 kg
Capacity: 5 m³
Designed for tractor loaders
Overall width 1800 mm, height 600 mm, depth 700 mm
Weight 135 kg
Designed for a compact tractor loader
1326,80 €
Width: 1600 mm; depth: 1000 mm; height: 450 mm
TAK 1600 – 185 kg
Internal reinforcing ribs
Double cutting edges
Mounting bracket tailored to the loader type
1364,00 €
Compatible with various bucket models
All edges of the blade are 3D beveled
Made to order
Attaches with two bolts
Width: 1800 mm
651,00 €
Width: 1200 mm; Grate height: 80 mm.
Mounting brackets are added according to the specific loader type.
Can also be configured with a three-point hitch or an A-frame (triangle) attachment.
Designed for use with a tractor loader or a rear three-point hitch.
Weight: 85 kg.
849,40 €