Light-duty rake-grapple KRH 1500 with movable pawls
Unit: tk
Qty: In Stock
Delivery time: 2-5 tööpäeva
Width 1500 mm and height 850 mm
Maximum opening range 1025 mm
Complete additional pawls and additional grille on the rear frame
Hydraulic hoses included
HARDOX tines
We add fasteners according to the loader type
Weight according to 195 + 45 kg
Designed for tractor loader
The light-duty rake-grapple KRH 1500 with movable pawls is designed to be attached to a tractor loader with a quick-release fastener. Allows you to pry stones out of the ground, uproot lighter roots, rake up branches and debris and gather them into a pile. It is also possible to move trees, stones, plows or garbage with a rake-grapple.
The KRH 1500 light rooting rake-grapple with movable paws is very good for landscaping and maintenance work in companies engaged in this. It is also a necessary tool in a home farm. The grapple can be used to lift raw material onto feed tables, unload loads. It is a good and durable tractor auxiliary tool for forestry work on a farm. Easy to use and suitable for many different tractors.
The ends of the grapple tine are made of HARDOX steel, which ensures their strength and wear resistance. Attachments SKID, euro or according to the customer's desired loader type. Suitable for tractor loaders from 20 hp -60 hp. The grapple is moved by one cylinder in the middle. Attachments can be added according to the loader type. The most common is the EURO attachment, but over the years more than 35 different attachment types have been used.
PS! Most products are made to order. Products in stock usually come without attachments, we will add them later according to the loader type. The attachment type must be determined before ordering.
1847,60 €
Width 720 mm, depth 560 mm, height 460 mm
Hardox blade
Attachment according to the type of loader
Weight 65 kg
1050,00 €
*Width 1200 mm, depth 650 mm, height 550 mm
*Reinforcing ribs inside the bucket
*Mounting adapted to the loader type
*Capacity 0.35 m³
*Weight 85 kg
762,60 €
- Width 1200 mm, depth 1000 mm, height 450 mm
TAK 1200 – 150 kg
Reinforcing ribs inside the bucket
Double cutting edges
Mounting bracket tailored to the loader type
1147,00 €
Width: 1800 mm; Grate height: 80 mm.
Mounting brackets are added according to the specific loader type.
Can also be configured with a three-point hitch or an A-frame (triangle) attachment.
Designed for use with a tractor loader or a rear three-point hitch.
Weight: 120 kg.
1004,40 €



