Categories

Hydralic components (1568)
- Hydraulic cylinders (158)
  - Hydraulic cylinder M250 series double effect (101)
  - Break cylinder simple effect (2)
  - Telescopic cylinder simple effect (20)
  - Hydraulic cylinders for Russian equipment (8)
  - Hydraulic pullers (5)
  - Pneumatic cylinder (22)
    - Pneumatic cylinder ISO 15552 (22)
- Components for hydraulic cylinders (90)
  - Welding bushes (8)
  - Cylinder sleeves (5)
  - Coupling Bolts / Pins / Fasteners (7)
  - Cylinder eyes on sliding bearing and grease nipple type C - for shaft (22)
  - Cylinder eyes for sliding bearing and grease nipple type N - body (15)
  - Cylinder fork (4)
  - Trunnion (6)
  - Cylinder pistons (4)
  - Cylinder caps (7)
  - Cylinder articulations (1)
  - Chromed rod for cylinder (18)
- Hydraulic distributors (95)
  - Hydraulic divider monoblock with 3/8" input (38)
  - Hydraulic divider monoblock with 1/2" input (33)
  - Electric control valves 3/8" (10)
  - Electric valves 1/2 " (5)
- Powerpacks (27)
- Hydraulic motors (98)
  - Hydraulic motor with MOMR type 32mm shaft (11)
  - Dosing pump (3)
  - PARKER (4)
  - Hydraulic motor OMP type (TF EPM) (14)
  - Hydraulic motor OMR type (TF EPRM) (13)
  - Hydraulic motor OMM type (TF EPMM) (10)
  - Hydraulic motor OMS type (TF EPMS) (12)
  - Hydraulic motor OMT type (TF EPMT) (9)
  - Momr Type Motor With Splined Shaft (11)
  - Piston motor (13)
  - Hydraulic motor / oil pump (12)
    - Hydraulic motor / oil pump Group II (EUR flange 1/8 taper shaft) (11)
    - Hydraulic motor / oil pump Group III (EUR flange 1/8 cone shaft) (1)
- Oil pumps (207)
  - Hi-Low two-stage oil pumps (4)
  - Mini oilpumps for powerpacks (13)
  - Piston pump (12)
  - Gear oil pumps I series (42)
    - Gear oil pumps I series (right) (21)
      - Gear oil pumps (10)
      - Gear oil pumps with BOSCH flange (11)
    - Gear oil pumps I series (left) (21)
      - Gear oil pumps (10)
      - Gear oil pumps with BOSCH flange (11)
  - Gear oil pumps II series (67)
    - Gear oil pumps II series (right) (34)
    - Gear oil pumps II series (left) (34)
  - Gear oil pumps III series (36)
    - Gear oil pumps III series (right) (18)
      - Gear oil pumps (9)
      - Gear oil pumps Eur standard (9)
    - Gear oil pumps III series (left) (18)
      - Gear oil pumps (9)
      - Gear oil pumps Eur standard (9)
  - Oilpumps for russian technic (6)
  - Reductors / spare parts (7)
  - Support drive without splined half-coupling (6)
  - Hand pumps (14)
- Valves and switches (180)
  - Electric Valve / Switch 1/2 " (8)
  - Electric Valve / Switch 3/8 " (11)
  - Mechanical valve / switch 1/2 "and 3/8" (0)
  - Electric magnetic valves (50)
  - Electric valve coils / coils (20)
  - Overpressure valves (8)
  - Rebound valves (6)
  - Stackable Solenoid Valves (12)
  - Ng6 Solenoid Valve With Lever - Spool Nº1 (16)
  - Adjustable one-way valves with lock (8)
  - Load shedding valve (5)
  - Flow dividers (13)
- Hydraulic accumulators (32)
  - HTR Series (6)
  - HB series (8)
  - HST series (9)
  - H series (9)
- Filters and housings (128)
  - Suction filter (11)
  - Rotating filter for return flow (12)
  - Return filter element (8)
  - Return filter element FILTREC (39)
  - Return filter housing FILTREC (10)
  - Reflux filter housing (4)
  - Screw return filter housing (4)
  - High Pressure Filter Set (8)
  - Medium pressure filter element (16)
  - High pressure filter (included with battery and electrical indicator) 450 bar (8)
  - High pressure filter element (7)
  - Fuel filters (1)
- Adapters (304)
  - Adapters (126)
  - Tees (29)
  - Plugs (45)
  - Adapters (28)
  - Quads (11)
  - Banjo adapters (41)
  - Bushing with nut (5)
  - Rotating hydraulic connections (16)
- Hydraulic ball valves (24)
  - Ballvalve (straight) (5)
  - Ballvalve tee (8)
  - Hydraulic tap (with triple ear) (5)
  - Hydraulic Faucet (Pair Triple) (4)
  - Mechanical valve / switch 1/2 "and 3/8" (2)
- Quick couplings for high pressaure (67)
- Electrical motors (11)
- Manometers / Vacum Meters (48)
  - Pressure Gauge Connectors (9)
  - Pressure gauges with 1/4" connection (16)
  - Pressure gauges with 1/2" connection (19)
  - Vacuum Gauges (2)
- Oil level indicators (9)
- Hydraulic locks (5)
- Dividers (17)
- Cooling radiators (19)
- Clutches and accessories for powerpacks (18)
- Different accessories (19)
- Flanges (0)
- Oil Tanks (18)
- Rotators and accessories (10)
  - Rotator Accessories (3)
  - Rotators (7)
Low-pressure components (47)
- Low-pressure valves and diverters (47)
  - Low-pressure electric valves (47)
    - Low-pressure valves (normally closed) (22)
    - Low-pressure valves (normally open) (25)
Wholesale (207)
- Wholesale of seals (31)
  - Wholesale of copper washers (20)
  - Wholesale of hydraulic bonded seals (11)
- Wholesale of clamps (80)
- Wholesale of bearings (11)
  - GE plain bearings wholesale (11)
- Grease Gun / Grease Guns Wholesale (14)
  - Wholesale of grease nipples (10)
  - Grease Equipment Accessories Wholesale (4)
- Wholesale of quick couplings (14)
- Wholesale adapters (13)
  - Adaptors / Fittings wholesale (13)
    - Adaptors- straight (external thread - external thread) wholesale (12)
    - Adapters - straight sk-sk nut wholesale (1)
- Wholesale Hydraulic Hose Components (29)
  - Wholesale Hydraulic Hose Sleeves (6)
  - Wholesale hydraulic hose fittings (23)
- Wholesale Fuel Hoses (14)
- Wholesale of Fasteners (1)
  - Wholesale of Nuts (1)
JIC Products (US Inch) (65)
- JIC Adapters (US Inch) (29)
- JIC Press Fittings (US Inch) (36)
Stainless steel AISI (335)
- Quick Couplings AISI316L (2)
- Ball Valves AISI316 (18)
- Grease nipples AISI A4 (7)
- Pressure Gauges / Vacuum Gauges AISI316 (23)
- Fasteners (7)
  - Bolts (7)
    - DIN 3015/1 hexagon socket A2 (7)
- Pipe fittings AISI 316 DIN2353 (21)
- Adapters AISI316L (51)
- Hydraulic hose ends AISI316L (89)
- Bonded Seal - BSP / metric size AISI316L (26)
- CAMLOCK AISI 316 L (78)
- Lock washer AISI (1)
- Industrial hoses AISI316 (11)
- ROLLER BUSHING CHAINS AND ACCESSORIES - stainless SS (1)
Hoses / Pipes / Protections / Crimp Fittings (733)
- Hydraulic hoses / crimp fittings (348)
- Low-pressure hoses (207)
- Hose covers (23)
- Air pipes (15)
- Pulled hydraulic pipes, fittings (140)
  - Hydraulic pipes (2)
  - Pipe fittings DIN2353 (138)
Seals (389)
- Copper washers (67)
- Piston seals (16)
- Hydraulic washer metric (20)
- Hydraulic washer - inch (18)
- Rubber ring OR (50)
  - Rubber ring OR NBR70 (42)
  - Rubber ring OR NBR90 (8)
- wiper seals (32)
- Support rings (16)
- Rod seals (94)
- Guide rings (30)
- SK-seals (41)
- JCB repair kit for cylinder (4)
Bearings (160)
- bearing GE type (41)
- Closed bearings (65)
- Bearing blocks (22)
- Ball bearings (11)
- Tapered Roller Bearings (16)
- Spherical roller bearings (5)
ROLLER BUSHING CHAINS AND ACCESSORIES (24)
- ROLLER BUSHING CHAINS (10)
- Chain Locks (Connecting Links) (14)
Clamps (251)
- Exhaust clamps (5)
- Hose clamps (regular) (37)
- Hose clamps (ABA type) (33)
- Hose clamp GBS (58)
- Hose clamp KSKL (12)
- Pipe clamp for hydraulic hoses / pipes (22)
- Ring splint (21)
- Lock washers (10)
  - Lock washer for hole (10)
- Coupling bolt (15)
- Splint (38)
Bushes (22)
- Pronce bush (14)
- Stainless steel bush (1)
- Zinc bush (7)
Cardans, splined shafts, universal joints (27)
Fuel pumps (21)
- Fuel pump spare parts (6)
Petrol and Diesel engines (27)
- Petrol engines (21)
- Diesel engines (11)
Central lubrication system and lubrication equipment/accessories (89)
- Hydraulic oils and greases (10)
- Accesories (15)
- Greasing nipples (straight) (16)
- Greasing nipples (45 degree) (7)
- Greasing nipple (90 degree) (9)
- Central lubrication system connections (26)
  - Central lubrication system extension joints (9)
  - Central lubrication system connector (17)
- Central lubrication system pipes (6)
Winches (9)
Pneumaatika (218)
- Pneumatic valves / electric valves / COILS (19)
- Pneumatic cylinder (22)
- Air cylinder components (32)
- 43/5000 Quick couplings for Pneumo (air hoses / pipes) (101)
- Regulators for compressed air system (19)
- Pneumatic tube (18)
V-belts (1)
- V-belts profile A (1)
Different ready-made kits (35)
Fasteners (260)
- Coupling bolt (15)
- Screws (0)
  - Woodscrews (0)
    - Terrace screws C2 EN 14592-2008 Standard (weatherproof) (0)
- Bolts (137)
  - DIN 912 (ISO 4762) 8.8 (46)
    - M6 - DIN 912 8.8 (22)
    - M8 - DIN 912 8.8 (24)
  - DIN 931 8.8 (91)
- Rivets (5)
- Threaded Rod (2)
  - Threaded rod DIN 976-1 (DIN 975) 4.8 Zinc (2)
- Nuts (1)
- Special order fasteners (1)
- Fastening accessories (39)
Tools (81)
Special offers (88)
Machinery and attachments (119)
- Log grapples (12)
- Snowplows (22)
- Loader Buckets (52)
- Front End Loader Tools (97)
- Log infeed decks (3)
- Cultivators (3)
- Potato planters (6)
- Tractor accessories (0)
- Rear buckets (0)
- Box plows (0)
- Forklifts (0)
- Backhoes (0)
- Hydraulic presses (1)
- Filtration Equipment (1)

Discount offers

Pressed end 1/2 "90 ° angle internal thread (reinforced)

Pressed end 1/2 "90 ° angle internal thread (reinforced)

SKU: PN13ABK90 , Qty: In Stock , Delivery time: 2-5

6,20 € (-20%) 7,73 €

Pressed fitting: M30 x 2 / 22mm pipe / 5/8 "hose

Pressed fitting: M30 x 2 / 22mm pipe / 5/8 "hose

SKU: PN16AOL20 , Qty: In Stock , Delivery time: 2-5

6,20 € (-17%) 7,44 €

Pressed fitting: M26 x 1.5 / 18mm pipe / 5/8 "hose 90 ° angle

Pressed fitting: M26 x 1.5 / 18mm pipe / 5/8 "hose 90 ° angle

SKU: PN16AOL90 , Qty: In Stock , Delivery time: 2-5

3,72 € (-19%) 4,62 €

View more

TRABIFLEX OÜ recommends!

* HELDRON OÜ - powerbanks, children's cars, phone accessories
www.heldron.ee

TRABIFLEX news

Hydraulic cylinder double-sided M250 series With ends GE25 50/30-200

SKU: HKHM50300200
Brand:

Unit: tk
Qty: In Stock
Delivery time: 1-5

Price: 178,56 €

157,48 €

With ends GE25 50/30-200

Piston (AL): 50mm
Rod (A): 30mm
Travel (CORSA): 200mm
Inputs (F): 3/8"
Total length from eye to eye center (I): 409mm
Diameter (D): 60mm
From the bottom to the center of the eye (M): 25mm
Eye outer size (S): 69mm
Eye size to the center (T / T1): 34.5mm
Working pressure: norm 210bar / max. 250 bar

*unpainted!

Similar products

Hydraulic cylinder double-sided M250 series 60*35*500

Hydraulic cylinder double-sided M250 series 60*35*500

SKU: HKHM03350500 , Qty: In Stock , Delivery time: 1-5

136,40 € (24%)
178,98 €

Add to wishlist

Hydraulic cylinder double-sided M250 series 70*40*500

Hydraulic cylinder double-sided M250 series 70*40*500

SKU: HKHM04400500 , Qty: In Stock , Delivery time: 1-5

175,67 € (17%)
210,80 €

Add to wishlist

Hydraulic cylinder double-sided M250 series 70*40*600

Hydraulic cylinder double-sided M250 series 70*40*600

SKU: HKHM04400600 , Qty: In Stock , Delivery time: 1-5

210,80 € (15%)
248,00 €

Add to wishlist

Hydraulic cylinder double-sided M250 series 80*50*1000

Hydraulic cylinder double-sided M250 series 80*50*1000

SKU: HKHM05501000 , Qty: In Stock , Delivery time: 1-5

355,74 € (14%)
413,33 €

Add to wishlist

Hydraulic cylinder double-sided M250 series 32*20*500

Hydraulic cylinder double-sided M250 series 32*20*500

SKU: HKHM32200500GE16 , Qty: Out of Stock , Delivery time: 21

130,20 € (38%)
210,80 €

Add to wishlist

NB! WHOLESALE BUYERS AND DEALERS PRICE AGREED, ASK FOR OFFER!
FREE TRANSPORT automatically applies to all orders over 500 euros up to 30 kg within Estonia!

More information: info@trabiflex.com või +372 555 10930

© TRABIFLEX OÜ 2026

<div align=center><a href='https://www.counter12.com'><img src='https://www.counter12.com/img-8YDYA4ZZ5w4ad36Z-3.gif' border='0' alt='conter12'></a><script type='text/javascript' src='https://www.counter12.com/ad.js?id=8YDYA4ZZ5w4ad36Z'></script></div>